Mechanical resistance of visors jig

P/N: 300_00_MRVECE

Download PDF

Request a Quote

The Cadex mechanical resistance of visors jig is used to test mechanical characteristics of motorcycle visors as per ECE 22, section 7.8.2. Once installed on either a monorail or twinwire machine, a drop hammer of 3 kg falls on the linear punch. Test technician can then take advantage of a guided drop & motorization function of existing standard impact machines.

Features:

  • Light interchangeable jig can be mounted on either monorail or twinwire testing machine
  • 300 grams linear punch device
  • Adjusting device preventing the penetrator punch to get closer than 5 mm from the surface of the headforms
  • Adjusting interface for all headform sizes

Dimensions (Approx.):

  • Length: 21.29 cm / 8.5 in
  • Width: 39.37 cm / 15.5 in
  • Height: 82.55 cm / 32.5 in
Adjustment screw to prevent contact with headform
Adjustment screw to prevent contact with headform
Shown installed on twin wire monorail.
Shown installed on twin wire monorail.
Adjusting interface to fit all headform sizes
Adjusting interface to fit all headform sizes

Fields marked with an * are required

Please check to be sure that all information is complete and correct to the best of your knowledge.