Uniaxial Monorail Triaxial Monorail Twin Wire Flying Arm Twin Wire 1000Kg Twin Wire Triaxial Twin Wire Mini Twin Wire Penetrator Playground Tester Safety Shoe Machine Chin Bar Machine Penetration Machine

Projection/Surface Friction (A) Projection/Surface Friction (B)

Projectile Shooter Ballistic Cannon High Velocity Ballistic Cannon Low Velocity

Control Center System Cadex Software Accelerometer Uniaxial Accelerometer Triaxial Load Cell Load Cell Australian Body Padding Load Cell Kit Penetration Control Box Control Box Velocimeter (Time Gate) Velocimeter (High Velocity)

Laser Table Pen & Headform Holders System Check Equipment Anvils Penetration Headform Holder Clamp Ball Arm Linear Imp./Penetr. Penetrator Device for Monorail NOCSAE Impact Accessories CSA Anvils Flying Arm Remote Control Monorail Base Monorail Drop Carriage Monorail Ball Arm Holder Monorail Track

EN960 Half, Magnesium K1A EN960 Full, Magnesium K1A D.O.T J.I.S Solid Wood Iso EN960 Full, Urethane Mountaineer's Headform Cell Kit ISO Headform Penetration CSA Penetration EN960 / ISO Penetration DOT ISEA Size 7 Alderson Penetration Hard Wood BSI Penetration Hard Wood EN1077 EN168 Headform High Temperature Headform Breathing Test Headform Photometry Test Headform N.I.J Ballistic

ASTM BSI DOT automatic Snell ECE-22 Compression/Tension Machine

American Roll Off European Roll Off Australian Roll Off NOCSAE Retention Leg

UV Chamber Unit Rain Conditioning Machine Cold Conditioning Machine Hot Conditioning Machine Radient Chamber

Field of Vision Goniometer Sand Abrader Machine Fogging Ocular Spectrophotometer Refractive Powers Bench Light Diffusion Bench

Control Center System

The Control Center System is used with some of our impact and penetration machines. It allows you to collect the results of the tests made by the machines and transfer the data to a computer.

Lights when the control center system is on. Lights when a connection to a computer is detected. Lights when something passes through the velocimiter (Time Gate). This dial is used to set teh impact test: (5) Uniaxial Z (Load Cell)  (6) Triaxial Z (Z Only) (7) Triaxial X, Y, Z When an uniaxial accelerometer is plugged to the control center system and the dial is set to Uniaxial Z, Ch.Z (10) will light. When an triaxial accelerometer is plugged to the control center system and the dial is set to Triaxial Z Only , Ch.Z (10) will light. When an triaxial accelerometer is plugged to the control center system and the dial is set to Triaxial X, Y, Z , Ch.X(8), Ch.Y(9) and Ch.Z(10) will all light.

If there is a velocimiter (Time Gate) on your impact tower it plugs into the control center system at the place indicated by the number (11). This is the place where the Acquisition card plugs into the control center system. The Control Box plugs in here. For a Uniaxial test, a cable is attached to the accelerometer and to the plug (15). For a Triaxial Z-Only or X,Y,Z test, a cable is attached to the accelerometer and to the plug (16). For a Triaxial X,Y,Z test, a cable is attached to the accelerometer and to the plug (16),(17) and (18). For a Triaxial X,Y,Z test , a cable is attached to the accelerometer and to the plug (16),(17) and(18). The LVDT plugs into this socket. This is the breaker. The power corde attaches here.

Acquisition card to be connected into computer's PCI port.