Data Sheet

2-J
Height above reference plane MM	1 Front 0'	2 15'	3 30'	4 45'	5 60'	6 75'	7 90'	8 105'	9 120'	10 135'	11 150'	12 165'	13 Rear 180'
102.5	0	0	0	0	0	0	0	0	0	0	0	0	0
100	20	20	19.5	19	18.5	18.5	19	20.5	23.5	27.5	31	31	31
95	37	36.5	35	34.76	33	33.5	34.5	36	39	43	46.5	47	47
90	48.95	48.96	47	45.5	43.5	43	44	46	49.5	54	57	57.93	57.79
85	58	58	56.5	54.5	52	50	51	52.5	56.5	61	64.5	65	65
80	65	65	64	61	58.5	56	57	59	62.5	66.5	70	71	71
70	76	75.5	74.39	71	67	65	65.5	67	71.5	75	79	80	80
60	84	83.38	81.5	78	73	70	71	73	77	81.5	85.5	87	87
50	90	89	86.8	83	77	74.5	75	77.5	81	86	90	91.95	91.82
40	93.9	92.5	90	85.5	80	77.5	77.5	80.5	84	89	93	95.5	95.5
20	99	97.32	94.31	88.82	82	79.5	79.5	82	86	92	97.3	100.26	100
0	101	99.5	95.5	88.5	82.5	79.5	79.5	82	86	92	97	100.5	101

Dimension H : 102.5 mm

Dimensions in millimeters

3-J
Depth above reference plane MM	1 Front 0'	2 15'	3 30'	4 45'	5 60'	6 75'	7 90'	8 105'	9 120'	10 135'	11 150'	12 165'	13 Rear 180'
0	101	99.5	95.5	88.5	82.5	79.5	79.5	82	86	92	97	100.5	101
-12.7	101	99.5	95	86.61	78	75.5	75.5	78	82	88	93	96.5	97
-22.7	101	100.5	94.13	84.5	76	72	70.5	73.5	77	83	88	91.5	92
-35	101	102	92.36	81.83	74	71	64	66.5	70.5	76.32	81	84	84.5
-45	101	102	90.71	79.56	72	68.5	61.5	63	66	71.42	75.75	77.89	76.5
-60	101	102	88.52	76.5	69	61.5	59	59.5	61	64.5	67.5	68.5	67
-75	101	102	86	74	67	60	57.5	58.5	59	60	60.5	61.5	62
-85	101	102	84	71.5	66	58	57.5	58.5	59	60	60.5	61.5	62
-90	101	102	82.55	69	56.5	57	57.5	58.5	59	60	60.5	61.5	62
-96.5	101	102	79.5	54.5	56.5	57	57.5	58.5	59	60	60.5	61.5	62
-106	101	104.5	54	54.5	56.5	57	57.5	58.5	59	60	60.5	61.5	62
-136	53.5	53.5	54	54.5	56.5	57	57.5	58.5	59	60	60.5	61.5	62

Dimension L : 12.7 mm

Measurement round head : 570 mm

Serial Number : XXXXX							Part Weight after Calibration : XXXXX Grs
Mag. K1A.

The CENTER OF GRAVITY of this HeadForm is at the cross section of the transversal plane and the longitudinal plane.